Catapults

Recently i’ve been busy making catapults. I now have 3 or 4 for sale for £15, contact me if you’re interested, on here or facebook.IMG_0256

They’re all natural forked branches with single, gold Theraband for the sling.

These are not toys, and are potentially deadly weapons in the wrong hands. I will not sell these to anyone under the age of 18, and please do not buy them for anyone under the age of 18. Having said that, in responsible hands they are a wonderful tool for building strength, for developing your hand-eye coordination and for having fun. If you have the permission of the land owner they are also a hunting tool.

So, what follows is a little piece about my experience getting into catapults, some videos I found useful, which you could use to help carve your own catapult and attach the rubber bands.
Equipment needed:
  • Saw to cut the branch.
  • Carving or bushcraft knife.
  • Self heal mat to slice the rubber. (Mine cost £6)
  • Rotary cutter to do the slicing. (Again £6)
  • Leather pouches to hold the ball bearing or stone. (10 for £5, could be better value to get leather and cut pouches yourself, depends how many you want to do)
  • Sandpaper/Wet n Dry/Emery paper – I use 240, 400, 800 and 1200 grit. (60p a sheet roughly I think)
  • Oil to protect the wood. (I used Ballistol http://en.wikipedia.org/wiki/Ballistol)
It took some time to work out the best forked branch for the frame, and that’s something to experiment with. Sometimes I found they split, very frustrating after all the effort of carving and sanding by hand.
http://www.youtube.com/watch?v=5J6qHdhp-YI A video showing how to cut the Theraband and attach it to the pouch.
I found that it takes a bit more pressure than you might think to cut cleanly through the rubber, and that if you clink the metal ruler while you’re slicing you’ll leave a little cling-on. This could leave a weak area in the rubber when you come to fire it, shortening the life-span. So be firm, and keep straight. I bought a 1 metre x 12.5cm section and sliced it into the tapered form. I found here that marking the rubber was important. I used a black Sharpie pen which left quite a wide line and allowed some inaccuracy to creep in. Next time i’d be much more careful with drawing the lines. For now i’m using a 25mm down to 20mm taper.
After sanding I oiled the frame a few times, then left it to dry before attaching the band-set. I found that there is much more accuracy when the tops of the 2 forks are nice and parallel. Might be an obvious point but one I overlooked initially.
When firing it I’ve found that i’m most accurate when I hold the catapult in my left hand, sight down the bands ie, they should lie parallel to each other, give a slight twist, not too much and ping! Very satisfying, especially when you get your eye in and hit 4 or 5 in a row. You know you’re doing something right then.
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s